瑞斯康达ONU设备互通配置指导手册(20090531)-南京廖华答案网

瑞斯康达ONU设备互通配置指导手册(20090531) 下载本文

内容发布更新时间 : 2024/12/23 6:20:33星期一下面是文章的全部内容请认真阅读。

EPON系统ONU互通配置指导手册

OLT state admin phy mac ONU transceiver self-diag Hardware Firmware id state state addr num type state version version ------------------------------------------------------------------------------------------------------------

2/1 Disabled Enabled present 00:e0:8e:88:02:00 0 EPM04B-SFP passed 0x20 N/A

第5步：

在第2板上的第1口pon口上手动注册ONU并激活，需要知道ONU的mac可以从第2步的告警中获取；

BBS4000(config-t)# interface epon-olt 2/1 BBS4000(config-t-if-olt-2/1)# BBS4000(config-t-if-olt-2/1)# onu 1

BBS4000(config-if-onu-2/1/1)# dba-sla mac 00:0e:5e:04:8d:13 手动ONU,mac地址为00:0e:5e:04:8d:13

BBS4000(config-if-onu-2/1/1)# no shutdown BBS4000(config-if-onu-2/1/1)#exit BBS4000(config-t-if-olt-2/1)# ex

BBS4000(config-t)# show interface epon-olt 2/1 brief

2/1 Running Enabled present 00:e0:8e:88:02:00 1 EPM04B-SFP passed 0x20 0x30200

此时ONU的pon口灯闪烁一会后会长亮，表示注册成功，OLT的pon灯变绿且长亮；

第6步：

查看在第2板上的第1口pon口上注册的ONU信息；

BBS4000(config-t-if-olt-2/1)# show interface epon-olt 2/1 onu-registered -------------------------------------------------------------------------

OLT = 2/1, Logical port = 1, ONU id=0, LLID[0]=0 Internal state = Running, admin state = Enabled

Registered state = Registered, authentication state = authorized ONU mac address = 00:0e:5e:04:8d:13 User ID = RTT TQ = 69 Laser_on_time = 4 Laser_off_time = 4

Hardware type = Unknown Hardware version = 0

PON firmware version = 01.254.04 Bootloader version = 01.254.04

第7步：

第 31 页共 42 页

EPON系统ONU互通配置指导手册

查看ONU的带宽分配，具体的配置可以参考BBS1000的命令行手册；

BBS4000(config-t-if-olt-2/1)# show in epon-olt 2/1 onu 1 dba-sla

OLT LPort PIR CIR FIR max pri policing mac calling (Kbps) (Kbps) (Kbps) burst limit station-id ---------------------------------------------------------------------------------------------

2/1 1 100000 512 0 100 1 disable 0 00:0e:5e:04:8d:13

BBS4000(config-t-if-olt-2/1)# ex BBS4000(config-t)#

第8步：

查询olt侧的vlan配置；

BBS4000(config-t)# show vlan

VID Name Ports Tag ports --------+---------------+-----------------------------------------------+------------------

1 Default VLAN {ge1/1-4,ge2/1-4,ge3/1-4,ge4/1-4,ge5/1-4,ge6/1-4,ge7/1-4,ge8/1-4,ge9/1-4,ge10/1-4,ge11/1-4,ge12/1-4} 106 GEPON-Manage ge1/1-2,ge3/1 ge1/1-2,ge3/1 291 switch-Manage ge1/2,ge3/1 ge1/2,ge3/1 766 voip ge1/3,ge3/1 ge1/3,ge3/1 1179 ge1/3,ge3/1 ge3/1 1180 ge1/2,ge3/1 ge3/1 1181 ge1/1,ge3/1 ge3/1 3972 ZhuanXian ge1/1-2,ge3/1 ge1/1-2,ge3/1

BBS4000(config-t)#

解析：vid 1为默认vlan，ge 3/1为olt的上联口，

BBS4000(config-t)# BBS4000(config-t)# show version

BBS4000 software release version: BBS4000_02.01.00.016 Bootrom version : 01.00.00.006

Cortina version: iROS SC Release 03.02.007 Cortina version: iROS OLT Release 03.02.007

Broadcom chip version: BCM56502_B2 Broadcom revision number: 0x13 Broadcom SDK version: sdk5.2.3

第9步：

将板2pon口1加入到vlan 3972，为tag模式；

BBS4000(config-t)# vlan 3972

第 32 页共 42 页

EPON系统ONU互通配置指导手册

BBS4000(config-t-vlan-3972)# member ge2/1 tagged BBS4000(config-t-vlan-3972)#

BBS4000(config-t-vlan-3972)# show vlan 3972

VLAN ID :3972

Name :ZhuanXian port(s) or group(s) :ge1/1-2,ge2/1,ge3/1 Tagged port(s) or group(s) :ge1/1-2,ge2/1,ge3/1 Untagged port(s) or group(s) :

第10步：

配置ONU的端口为vlan tag模式；

BBS4000(config-t-vlan-3972)# ex

BBS4000(config-t)# interface epon-olt 2/1 BBS4000(config-t-if-olt-2/1)# onu 1

BBS4000(config-if-onu-2/1/1)# remote-mgmt eth 1 vlan-mode tag 3972 8100

配置tag模式vlan 3972 type 8100

Error: Set olt 5 onu 1 VlanPassSet disable failed （虽然返回error，但是配置是成功，并且生效的，可以忽略error）

BBS4000(config-if-onu-2/1/1)# BBS4000(config-if-onu-2/1/1)#

BBS4000(config-if-onu-2/1/1)# show configuration running BBS4000(config-t-if-olt-2/1)# exit

BBS4000(config-t)# interface epon-olt 2/1 BBS4000(config-t-if-olt-2/1)#

BBS4000(config-t-if-olt-2/1)# show interface epon-olt 2/1 onu-registered -------------------------------------------------------------------------

OLT = 2/1, Logical port = 1, ONU id=0, LLID[0]=0 Internal state = Running, admin state = Enabled

Registered state = Registered, authentication state = authorized ONU mac address = 00:0e:5e:04:8d:13 User ID = RTT TQ = 69 Laser_on_time = 4 Laser_off_time = 4

Hardware type = Unknown Hardware version = 0

PON firmware version = 01.254.04 Bootloader version = 01.254.04

第 33 页共 42 页

BBS4000(config-t-if-olt-2/1)#

EPON系统ONU互通配置指导手册

4.4 BBS4000/1000+相关命令及解析 BBS4000/1000+ONU相关配置命令

BBS4000/1000+OLT相关配置命令

第 34 页共 42 页 34

EPON系统ONU互通配置指导手册

4.4.1 PON 全局配置

PON System

Access Level: 2

This command is to assign PON system global parameter under configuration terminal command mode (BBS1000(config-t)#).

Help Description: To configure PON global parameters

local-authentication

Syntax: pon-sys local-authentication Possible Values:

enable: Enable local SLA authentication disable: Disable local SLA authentication

Help Description: Enable or disable local SLA authentication.

lport-strict-binding

Syntax: pon-sys lport-strict-binding Possible Values:

enable: Enable local logical port strict binding disable: Disable local logical port strict binding

Help Description: Enable or disable local logical port strict binding.

mac-addr-aging-time

Syntax: pon-sys mac-addr-aging-time

第 35 页共 42 页 35

Word文档下载：瑞斯康达ONU设备互通配置指导手册(20090531).doc

搜索更多:瑞斯康达ONU设备互通配置指导手册(20090531)