内容发布更新时间 : 2024/5/2 17:46:09星期一 下面是文章的全部内容请认真阅读。

Possible Values:

EPON系统ONU互通配置指导手册

: <10..65535>. MAC address aging time in seconds with granularity of 5 seconds, for example: 5, 10, 105, ...

remote-mgmt onu-authentication

Syntax1: pon-sys remote-mgmt onu-authentication time-out

Syntax2: pon-sys no remote-mgmt onu-authentication time-out

Possible Values:

: ONU authentication time out in second from 1 to 6000. Default Value:

= 60 seconds.

Help Description: Set/clear ONU authentication time out in second.

SLA-synchronization

Syntax: pon-sys sla-synchronization Possible Values:

enable: Enable local SLA synchroniation with radius authentication

disable: Disable local SLA synchroniation with radius authentication

Help Description: Enable or disable local SLA synchroniation authentication.

VLAN-ID-base

Syntax: pon-sys vlan-id-base Possible Values:

: VLAN ID base for local SLA from 2 to 4094 Help Description: Configure VLAN ID base for SLA.

4.4.2

PON配置OLT

Interface EPON-OLT

This command is to enter EPON-OLT configure level.

Syntax: interface epon-olt

Possible Values:

第 36 页 共 42 页 with radius 36

EPON系统ONU互通配置指导手册

: {1..2}/{1...4}

Access Level: 1

Help Description: To enter OLT configure level Example:

BBS1000+(config-t)#

interface epon-olt 1/1 BBS1000+(config-t-if-olt-1/1)#

Enable OLT This command is to enable the administration status of the interface. Syntax: no shutdown

Access Level: 2

Help Description: To enable the OLT

Disable OLT This command is to disable the administration status of the interface. Syntax: shutdown

Access Level: 2

Help Description: To disable the interface

DBA

This command is to configure DBA parameter.

Syntax1: [no] dba algorithm internal [discovery-size ] [discovery-freq ]

[cycle-type < static | expanding | dynamic >]* [cycle-size ]

Syntax2: [no] dba algorithm plato [discovery-freq ] [cycle-size ] Possible Values:

dis-size: Discovery size of internal algorithm in TQ,0~65535 Freq: Discovery frequency of Plato algorithm in mS, 0~255 cycle-size: Cycle size of Plato algorithm in 50uS unit,1-255

Default value:

dis-size: 0x700 Freq: 500

第 37 页 共 42 页

37

EPON系统ONU互通配置指导手册

Cycle-size: 65536

Access Level: 1

Note: * in the command above means that the feature aren't be supported in current version.

ONU VLAN

This command is to configure ONU VLAN.

Syntax: onu-vlan Possible Values:

: onu logical number list, for example, 1-32. : <1..4094> Access Level: 2

Help Description: configure onu vlan

4.4.3 PON配置ONU

ONU Configuration

This command is to enter ONU configuration level Syntax: onu Possible Values: 1~32 Access Level: 2

Help Description: To enter onu configuration level Example:

BBS1000+(config-t)#

interface epon-olt 1/2 BBS1000+(config-t-if-olt-1/2)#

onu 2 BBS1000+(config-if-onu-1/2/2)#

Enable ONU This command is to enable/register the ONU Syntax: no shutdown

Access Level: 2

Help Description: Enable/register ONU

Disable ONU

第 38 页 共 42 页

38

EPON系统ONU互通配置指导手册

This command is to shut down the ONU

Syntax: shutdown

Access Level: 2

Help Description: To shut down ONU

Downstream This command is to configure ONU downstream parameters Syntax1: downstream bandwidth policing Access Level: 2

Help Description: Enable the downstream bandwidth policy. Syntax2: downstream max-burst-size Possible Values:

: <0..8192>. It is the downstream max-burst-size in Kbytes. The default value is 256Kbps. Access Level: 2

Syntax3: downstream maximum-bandwidth [Mbps] Possible Values:

: <0..1000>. Maximum bandwidth(Mbps). The default value is 1000Mbps.

Access Level: 2

Syntax4: downstream maximum-bandwidth Kbps Possible Values:

: <0..1000000>. Maximum bandwidth(Kbps). The default value is 1,000,000Kbps.

Access Level: 2

Syntax4: downstream prefer < high-priority-frames | short-frames> Access Level: 2 Help Description:

high-priority-frames - Enable the downstream high priority frames preference short-frames - Enable the downstream short frames preference

MPCP timeout

This command is to set the MPCP timeout value in milliseconds.

Syntax: mpcp-timeout Possible Values:

: <200..5000> milliseconds.

第 39 页 共 42 页 39

Access Level: 2

MPCP timeout in milliseconds. The default value is 4000

EPON系统ONU互通配置指导手册

DBA-SLA

This command is to configure SLA parameters

Syntax: dba-sla {[committed-bandwidth ] [maximum-bandwidth < max- bandwidth >] [mac ][mac-limit ] [class ]} Possible Values:

: 1 - 1000Mbps : <1..1000>

<1..1000000>

- Max bandwidth(Mbps)

- Max bandwidth(Kbps)

:<1|2|6|14|30|62|126|254|8192>, MAC limit number. : 0 - 7 Default Value:

committed-bandwidth: 10 Mbps max-bandwidth: 100 Mbps

Access Level: 1

Help Description: To configure SLA.

remote-mgmt

This command is to configure onu remote management parameters.

Syntax1: remote-mgmt auto-negotiation enable < 10M|100M|1000M>

Syntax2: remote-mgmt auto-negotiation disable <10M | 100M Syntax3: remote-mgmt mac

Access Level: 2

Help Description: To configure onu security strategy.

multicast-enable

This command is to enable onu multicast filtering.

Syntax: [no] multicast-enable Access Level: 2

Help Description: to enable onu multicast filtering

第 40 页 共 42 页 1000M> 40

|