内容发布更新时间 : 2024/12/25 0:20:11星期一 下面是文章的全部内容请认真阅读。
远程信息接收显示屏设计
The Display Design of Receiving
Remote Information
摘 要
伴随着电子行业的快速发展,传统中经由PC机传输显示内容到显示屏的办法渐渐显现出一系列的毛病以及弊病。而使用短消息操控显示屏显示内容的办法则显著地降低了成本费用,在实际工作中起到了事半功倍的作用,且更具有适用性和易用性。
本设计是基于单片机的远程信息接收显示屏,操作简单是本设计产品的主要特点。本设计采使用STC89C52RC为主控模块,西门子公司出产的TC35模块为信息接收模块,金鹏公司出产的12864LCD液晶显示屏为显示模块。在设计上,主要通过STC89C52RC单片机模块与西门子的TC35模块、LCD12864模块相连。在STC89C52RC单片机控制模块内写入AT指令来控制TC35模块对新接收的消息的读取;然后,在单片机的控制下,将消息存储到数组中并送到LCD12864中显示出来,随后又通过AT指令将短信删除,为新短信的接收显示做准备。整个过程操作简单,适用性强,因此,该设计具有很强的使用价值和现实意义。
关键字:STC89C52RC 远程信息 液晶显示 TC35
I
Abstract
With the development of electronic industry, the traditional way of transferring information to display screen by computer gradually exposed a series of problems and shortcomings. But
the
way
by
using
of
short
message control
method
of display content,can greatly reduces the cost. And it can play a double role in the actual work,and it is more useful.
This design is a receiving remote information display based on single chip microcomputer, and Simple operation is the main characteristic of this design product. This design adopts STC89C52RC as the main control module, the Siemens TC35 module is receiving information module, jinpeng company’s 12864 LCD screen is the display module. In the design, the STC89C52RC module connects with TC35 module and LCD12864 module.the AT commands is written into the STC89C52RC control module to control the TC35 module receive the new message; and then;under the control of the STC89C52RC,the message stored in the array and to display LCD12864, then removed by the AT command, to prepare for the new SMS receiving and displaying. The whole process simple operation, strong applicability, therefore, the design has the very strong use value and practical significance.
Key words: STC89C52RC remote information LCD TC35
II