内容发布更新时间 : 2024/12/23 17:51:21星期一 下面是文章的全部内容请认真阅读。

6000交换机配置维护手册

(Native IOS)

中国思科培训网

广州电力宽带网测试报告

目 录

1. 连接设备 ...................................................................................................... 3 1.1. 从CONSOLE连接 .................................................................................... 3 1.2. 远程TELNET连接 ................................................................................... 5 2. 基本信息配置 .............................................................................................. 5 2.1. 配置机器名、TELNET、密码 ................................................................... 5 2.2. 配置SNMP网管串 ................................................................................... 5 3. 冗余及系统高可用性配置............................................................................. 6 3.1. 同步SUPERVISOR ENGINE配置 ............................................................... 6 3.2. 查看SUPERVISOR ENGINE冗余 ............................................................... 7 3.3. 向冗余SUPERVISOR ENGINE拷贝IOS文件 ............................................. 8 4. 端口设置 ...................................................................................................... 9 4.1. 基本设置 ................................................................................................ 9 4.2. 配置三层端口 ....................................................................................... 10 5. 配置二层端口 ............................................................................................ 10 5.1. 配置TRUNK: ......................................................................................... 10 6. 配置HSRP ................................................................................................ 11 6.1. 配置二层普通交换接口......................................................................... 12 6.2. 清除二层接口配置 ................................................................................ 12 7. 配置VLAN ................................................................................................ 12 8. 动态路由协议--OSPF配置 ........................................................................ 13 8.1. 启用OSPF动态路由协议 .................................................................... 14 8.2. 定义参与OSPF的子网 .......................................................................... 14 8.3. OSPF区域间的路由信息汇总............................................................... 14 8.4. 配置密码验证 ....................................................................................... 15

中望商业机器有限公司

i

广州电力宽带网测试报告

8.5. 设置产生缺省路由 ................................................................................ 15 9. 交换机维护 ................................................................................................ 16 9.1. 交换机IOS保存和升级 ........................................................................ 16 9.2. 交换机密码恢复 ................................................................................... 16

中望商业机器有限公司 ii

广州电力宽带网测试报告

1. 连接设备

1.1. 从console连接

第一次对6000交换机进行配置，必须从console进入。

首先先将机器上架，按要求接好电源，然后用随机附带的Console线和转接头将交换机的console口与PC的串口相联，如下：

Com口设置如下：

?

9600 baud

? ? ?

8 data bits No parity 2 stop bits

检查电源无误后，开电，可能会出现类似下面的显示，按黑粗体字回答:

System Bootstrap, Version 6.1(2)

Copyright (c) 1994-2000 by cisco Systems, Inc.

c6k_sup2 processor with 131072 Kbytes of main memory

rommon 1 > boot slot0:c6sup22-jsv-mz.121-5c.EX.bin

Self decompressing the image : ################################################# ############################################################################### ############################################################################### ############################################################################### ############################################################################### [OK]

中望商业机器有限公司

3

广州电力宽带网测试报告

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(3a)E4, EARLY DEPLOYMENT R ELEASE SOFTWARE (fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Sat 14-Oct-00 05:33 by eaarmas

Image text-base: 0x30008980, data-base: 0x303B6000

cisco Cat6k-MSFC2 (R7000) processor with 114688K/16384K bytes of memory. Processor board ID SAD04430J9K

R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache Last reset from power-on X.25 software, Version 3.0.0.

509K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).

Press RETURN to get started!

--- System Configuration Dialog ---

Would you like to enter the initial dialog? [yes]: no 回答：NO，进入手工配置，在router>下，输入enable 回车，进入全局模式

中望商业机器有限公司 4