内容发布更新时间 : 2025/1/15 21:59:01星期一 下面是文章的全部内容请认真阅读。

AP瘦切换胖（boot-loader）

升级准备：

#下载版本文件

#搭建TFTP服务器

#配置网卡的ip地址

升级过程：

dir Directory of flash:/

0 -rw- 7224320 Aug 08 2008 20:00:00 wa2600a_fit.bin 1 -rw- 808 Apr 26 2000 12:02:04 startup.cfg

30177 KB total (23117 KB free)

sys

%Apr 26 12:05:27:101 2000 WA2620i-AGN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.

[WA2620i-AGN]interface Vlan-interface 1 //瘦版本vlan 1接口是自动获取，没有ip地址，此处配置ip地址为了和tftp服务器通信

[WA2620i-AGN-Vlan-interface1]ip address 192.168.0.50 24 [WA2620i-AGN-Vlan-interface1]dis this #

interface Vlan-interface1 ipv6 address auto

ip address 192.168.0.50 255.255.255.0 //配置ip地址成功 ipv6 address dhcp-alloc

#

return

[WA2620i-AGN-Vlan-interface1]quit [WA2620i-AGN]quit

tftp 192.168.0.10 put wa2600a_fit.bin //将瘦版本文件上传到tftp服务器上（电脑本地）

tftp 192.168.0.10 get wa2600a_fat.bin //从tftp服务器上获取软件版本 File will be transferred in binary mode

Downloading file from remote TFTP server, please wait............. TFTP: 9127936 bytes received in 67 second(s)

File downloaded successfully. //成功下载软件版本

dir Directory of flash:/

0 -rw- 7224320 Aug 08 2008 20:00:00 wa2600a_fit.bin 1 -rw- 808 Apr 26 2000 12:02:04 startup.cfg

2 -rw- 9127936 Apr 26 2000 12:07:54 wa2600a_fat.bin //胖版本

30177 KB total (14203 KB free)

boot-loader file wa2600a_fat.bin main //指定为加载的主文件 Verifying boot file ......

This command will set the boot file. Continue? [Y/N]:Y //确认加载

%Apr 26 12:01:37:775 2000 WA2620i-AGN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.Y

The specified file will be used as the main boot file at the next reboot on slot 1!

display boot-loader

The boot file used this time:flash:/wa2600a_fit.bin attribute: main

The boot file used next time:flash:/wa2600a_fat.bin attribute: main //下次启动为胖版本 Failed to get the backup boot file used next time! Failed to get the secure boot file used next time! reboot //重启

Start to check configuration with next startup configuration file, please wait.........DONE!

This command will reboot the device. Current configuration will be lost, save current configuration? [Y/N]:N //不保存配置

This command will reboot the device. Continue? [Y/N]:Y //确认重启 #Apr 26 12:02:11:179 2000 WA2620i-AGN DEVM/1/REBOOT: Reboot device by command.

%Apr 26 12:02:11:179 2000 WA2620i-AGN DEVM/5/AC_REBOOT: System is rebooting now.

%Apr 26 12:02:13:279 2000 WA2620i-AGN IFNET/3/LINK_UPDOWN: GigabitEthernet1/0/1 link