JY3428 IEC62321-5:2015中文译文 下载本文

内容发布更新时间 : 2024/12/25 13:21:40星期一 下面是文章的全部内容请认真阅读。

36

参考资料

[1] ERNST, T., POPP, R., WOLF, M., VAN ELDIK, R., Analysis of eco-relevant elements and noble metals in printed wiring boards using AAS, ICP-OES and EDXRF, Anal.Bioanal. Chem., 2003, 375:p.805-814

[2] IEC 62321-7-2, Determination of certain substances in electrotechnical products – Part7-2: Hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetricmethod

其它非引用的参考资料

EN 1122, Plastics – Determination of cadmium – Wet decomposition method

EN 13346, Characterization of sludges – Determination of trace elements and phosphorus –Aqua regia extraction methods

EDGELL, K., US EPA Method Study 37 – SW-846 Method 3050 Acid Digestion of Sediments,Sludges, and Soils. EPA Contract No. 68-03-3254, November 1988

United States Environmental Protection Agency (EPA), EPA SW-846 Method 3052,Microwave-assisted acid digestion of siliceous and organically based matrices

United States Environmental Protection Agency (EPA), EPA SW-846 Method 6010B, Inductively coupled plasma-atomic emission spectrometry

United States Environmental Protection Agency (EPA), EPA SW-846 Method 7000, Series measurement methods for lead, cadmium, chromium and mercury

RITTER, A. MICHEL, E. SCHMID, M. AFFOLTER, S., Interlaboratory test on polymers: determination of heavy metals in polymer matrices, Polymer testing 23 (2004), 467-474

ASTM D 4004-93, Standard test methods for rubber determination of metal content by flameatomic absorption (AAS) analysis

ASTM D 3335-85A, Standard test method of low concentration of lead, cadmium and cobalt inpaint by atomic absorption spectroscopy

ASTM D 1224-92, Standard test methods for zinc and cadmium in paper

ASTM D 3624-85A, Standard test method for low concentration of mercury in paint by atomicabsorption spectroscopy

36

37

ASTM C 146-94A, Standard test methods for chemical analysis of glass sand

ASTM C 169-92, Standard test methods for chemical analysis of soda-lime and borosilicateglass

EN 10181, Chemical analysis of ferrous materials determination of lead in steels flame atomicabsorption spectrometric method

ASTM E 350-95, Standard test methods for chemical analysis of carbon steel, low-alloy steel,silicon electrical steel, ingot iron, and wrought iron

ASTM E 353-93, Standard test methods for chemical analysis of stainless, heat resisting, maraging, and other similar chromium-nickel-iron alloys

ASTM E 363-93, Standard methods for chemical analysis of chromium and ferrochromium

ASTM E 361-99, Standard test methods for the determination of arsenic and lead in ferromanganese

ASTM E 362-99, Standard test methods for the determination of arsenic and lead in silicomanganese and ferrosilicon manganese

ASTM E 34-94, Standard test methods for chemical analysis of aluminum and aluminum-basealloys

ASTM E 478-03, Standard test methods for chemical analysis of copper alloys

ASTM E 1834-96, Standard test method for determination of lead in nickel alloys by electrothermal atomic absorption spectrometric method

ASTM E 536, Standard test methods for chemical analysis of zinc and zic alloys

EN 12441-3, Zinc and zinc alloys – Chemical analysis – Part 3: Determination of lead, cadmium and copper – Flame atomic absorption spectrometric method

United States Environmental Protection Agency (EPA), EPA SW-846 Chapter 1--Quality Control, Revision 1: July 1992

_____________

37