内容发布更新时间 : 2024/5/19 13:00:56星期一 下面是文章的全部内容请认真阅读。
毕业设计英文翻译
LIMESTONE STACKER AND RECLAIMER
Applications
The limestone is carried by the stacking belt conveyor, and discharged on belt conveyor of the boom stacker. While the stacker moves, it is discharging the material inside the yard and formed herringbone stockpile, and completes the first mixing function. After the stacker piled the material, the full section reclaimed from the middle of the yard by the reclaimer, and discharged the material on the belt of the reclaimer, and completed the second uniformity for the bulk material.
The Main Technical Performance Parameter
1.Material Feature
? Kind of material: limestone ? Volume of material: 1.45t/m3 ? Granular:0-75mm
2.Stock-yard parameter ? Length of stack yard: 214m ? Width of stockpile:37m ? Height of stockpile:15.5m
3.Stacker performance parameters ? Stacker type:CBD1250/24 ? Stacking capacity:1250t/h ? Stacking mode:∧ shaped ? Traveling drive unit:
? central distance of rail:5m
1
毕业设计英文翻译
? model of rail:QU80 ? traveling speed:20m/min ? wheel diameter:φ630mm ? Suspended boom part: length of boom:32.12m ? Boom belt conveyor:width of belt conveyor:1400mm
? speed of belt conveyor:1.7m/s ? central distance of head and tail wheel:24m ? Luffing institution:angle of luffing:-13°-+13°
? mode of drive: hydraulic drive ? cylinder diameter:φ125mm ? Feeding carriage:pitching angle:13° ? Total unit power:120Kw
4.Reclaimer performance parameter: ? Reclaimer type:QGQ600/40 ? Drawing no.:QGQ70.00 ? Reclaiming capacity:rated 600t/h ? Steel rail:QU80
? Sapn of bridge beam:40m ? Pitch of scraper chain:315mm ? Diameter of wheel:φ710mm
? Moving speed of end beam for reclaiming:0.005-0.05m/min ? Moving speed of rake:15m/min ? Chain speed of scraper:0.5m/s ? Total unit power:200Kw
Basic structure and working principle
1. stacker
Stacker is made of:1)suspended boom part, 2) traveling mechanism,3)hydraulic
2
毕业设计英文翻译
system, 4)feeder carriage, 5) rail system, 6) cable supporter, 7)power cable reel, 8) limited switch device etc.
1.1 suspended boom part
Boom frame is made of 2 Ⅰ-shape beams of changed sections.It is jointed a whole by steel plate transversely.Ⅰ-shape beam is welded by steel plate.The boom frame is made into sections for transporting,and welded into the whole unit at site.
On the boom frame, the belt conveyor is installed,it may be up 13° and down 13°,and the transmission adopts motor-coupling-reducer-transmission drum structure. A take-up device is mounted in the head of a place of discharging the there is a protecting device for anti-skew device for the belt, the head and tail of the belt conveyor have cleaner. The bend pulley in the head discharge has the adjustable baffler.the dropping point may be adjusted by the angle and position of the baffler according to the actual condition on site.
There is some counterweight mounted on the suspended boom of cylinder pushed.
There are gangways on both sides of the boom,the steel wire netting are paved on the gangway up to the head of the boom in order to examine and look around the belt conveyor.
In order to transfer loads transversely,there is a shear supporter at the adjustable point upper the frame of a door. At the boom and triangle frame,there is a limited angle switch.When operated normally,the boom seings between -13°—+13°;when changed the pile,the boom raises the max angle +13°。
1.2 Traveling mechanism
Traveling mechanism consists of the frame of door and drive unit. The frame of door if jointed with the upper boom by boll type hinges, and the whole weight of boom presses the frame of door. Under the frame of door, the both sides are
3