内容发布更新时间 : 2024/5/2 11:38:15星期一 下面是文章的全部内容请认真阅读。

#进入系统视图

system

#显示当前配置的所有vlan [Quidway] display vlan all The following static VLANs exist: 1(default), 2-4092, 4094 #显示静态配置的vlan

[Quidway] display vlan static The following static VLANs exist: 1(default), 2-4092, 4094 #显示vlan10信息

[Quidway]display vlan 10

The specified VLAN does not exist. #新建一个vlan20，并进入vlan20视图 [Quidway]vlan 20

#指定VLAN端口，动态vlan划分时不需要指定 [Quidway-vlan20] port ethernet 0/2 to ethernet 0/5

#给VLAN指定IP地址 （三层交换机才可以设置VLAN IP 我们的交换机做不了） [Quidway-vlan20] interface vlan-interface 20

[Quidway-vlan-interface20] ip address 192.169.1.251 255.255.0.0 [Quidway-vlan-interface20] save [Quidway-vlan-interface20] quit #显示vlan20信息

[Quidway] display vlan 20 VLAN ID: 20

VLAN Type: static

Route Interface: configured IP Address: 192.169.1.251 Subnet Mask: 255.255.0.0 Description: GuestVlan Name: VLAN 0069 Tagged Ports: none Untagged Ports:

Ethernet0/2 Ethernet0/3

Ethernet0/4 Ethernet0/5 添加端口为trunk口 进入到指定端口下面

[Quidway]interface Ethernet0/1

[Quidway interface Ethernet0/1]port link-type trunk

[Quidway interface Ethernet0/1]port trunk pemit vlan10 20

查看vlan

[Quidway] display vlan all 查看当前交换机配置 [Quidway] display cur 查看当前交换机端口配置 [Quidway] display interface all 查看MAC地址

[Quidway] display mac