内容发布更新时间 : 2024/12/28 10:25:28星期一 下面是文章的全部内容请认真阅读。

I

轻化课程设计-2篇

400t/d胶印书刊纸打浆流送工段工艺流程设计

摘 要

本次设计是一个日产400吨胶印书刊纸造纸车间打浆流送工段。说明书主要有以下几部分：介绍设计依据并描述设计题目，工艺部分，在设计的两个流程中选择一个相对合理的流程，结合图纸对工艺条件进行了介绍与分析，进行浆水平衡计算，并说明了生产工艺及浆水平衡，进行了设备选型，最后为设计的总结、参考文献以及致谢。 关键词：胶印书刊纸,打浆流送,工艺平衡计算,工艺流程图

II

System to the Refining and Approach of Papermaking Workshop

Design of 400t Fine Paper per Day

ABSTRACT

It mainly about the Refining and Approach system of papermaking workshop

section ,which produces 400 tons of fine paper everyday.

The characteristic and design principle of approach system for fine

paper production were briefly introduced.

This design take commodity softwood pulp and hardwood pulp as the main

raw materials, after repulping, beating, matching into a pulp pool, the pulp then in sequence to a high voltage box, strong pulp pumps, purification system, screening system, flow slurry box, forming eventually transported into squeeze system . Based on the above mentioned each part ,the design to complete fine paper to \\high\quality property requirements on the reasonable and economic design .Improving the fine paper practicality.

KEYWORDS : fine paper, approach system, high purity, high whiteness, high strength ,high evenness

III

目 录

摘 要 .................................................................... I ABSTRACT ................................................................ II 目 录 .................................................................. III 绪 论 .................................................................... I 1.课题的目的及任务 ...................................................... II 2.工艺设计 ............................................................. III

2.1产品标准 ........................................................ III 2.2主要技术指标 ..................................................... IV

2.2.1原料的选择与配比 ............................................ IV 2.2.2浆料及辅料的特性及加入方式 ................................... V 2.2.3纸机主要技术指标 ............................................ VI 2.2.4造纸机车速计算 .............................................. VI 2.2.5打浆工艺 ................................................... VII 2.3生产工艺流程图 ................................................. VIII

2.3.1两个生产工艺流程的比较 ....................................... X 2.3.2施胶剂不同 ................................................. XII 2.4工艺参数 ....................................................... XIII

2.4.1工艺参数表 ................................................ XIII 2.4.2主要辅料 .................................................. XVII 2.5浆水平衡计算 .................................................. XVIII 3.浆水平衡收支总表 ..................................................... XXI 设备选型 .............................................................. XXIV 设 计 总 结 ........................................................... XXVI 致 谢 ................................................... 错误！未定义书签。 参 考 文 献 ............................................. 错误！未定义书签。