网络工程专业生产实习报告资料

内容发布更新时间 : 2024/5/5 11:38:13星期一 下面是文章的全部内容请认真阅读。

通过一台交换机和一台路由器实现两台电脑的相互通信。我也自己动手做出来了代码如下：

可见实现了应有的功能。

8 / 34

单臂路由实现局域网的划分，如图所示：

实现PC1和PC3通信，PC2和PC4通信。最后还是将其顺利完成，代码如下：

sys

System View: return to User View with Ctrl+Z.

[RT2]int g0/0/0

[RT2-GigabitEthernet0/0/0]port l

[RT2-GigabitEthernet0/0/0]port link-t

[RT2-GigabitEthernet0/0/0]port link-t

[RT2-GigabitEthernet0/0/0]port link-t

[RT2-GigabitEthernet0/0/0]port link-ty

9 / 34

[RT2-GigabitEthernet0/0/0]port

[RT2-GigabitEthernet0/0/0]port link-type permit vlan all

^

% Unrecognized command found at '^' position.

[RT2-GigabitEthernet0/0/0]quit

[RT2]interface g0/0/0

[RT2-GigabitEthernet0/0/0]port

^

% Incomplete command found at '^' position.

[RT2-GigabitEthernet0/0/0]po

[RT2-GigabitEthernet0/0/0]p

[RT2-GigabitEthernet0/0/0]port

[RT2-GigabitEthernet0/0/0]port l

[RT2-GigabitEthernet0/0/0]port link-t

[RT2-GigabitEthernet0/0/0]quit

[RT2]int g0/0/0.1

[RT2-GigabitEthernet0/0/0.1]

10 / 34

%Jul 10 16:39:16:281 2016 RT2 IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface GigabitEthernet0/0/0.1 is UP.

[RT2-GigabitEthernet0/0/0.1]

[RT2-GigabitEthernet0/0/0.1]ip add 10.0.0.254 24

[RT2-GigabitEthernet0/0/0.1]v

[RT2-GigabitEthernet0/0/0.1]vlan-type dot1q vid 10

[RT2-GigabitEthernet0/0/0.1]quit

[RT2]int g0/0/0.2

[RT2-GigabitEthernet0/0/0.2]

%Jul 10 16:40:23:937 2016 RT2 IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface GigabitEthernet0/0/0.2 is UP.

[RT2-GigabitEthernet0/0/0.2]ip add 20.0.0.254 24

[RT2-GigabitEthernet0/0/0.2]v

[RT2-GigabitEthernet0/0/0.2]vlan-type dot

[RT2-GigabitEthernet0/0/0.2]vlan-type dot1q vid 20

[RT2-GigabitEthernet0/0/0.2]quit

[RT2]

11 / 34

SYS

System View: return to User View with Ctrl+Z.

[SW2]vlan 10

[SW2-vlan10]port e0/4/1

[SW2-vlan10]vlan 20

[SW2-vlan20]port e0/4/2

[SW2-vlan20]quit

[SW2]int e0/4/3

[SW2-Ethernet0/4/3]port l

[SW2-Ethernet0/4/3]port link-t

[SW2-Ethernet0/4/3]port link-type t

[SW2-Ethernet0/4/3]port link-type trunk

[SW2-Ethernet0/4/3]port t

[SW2-Ethernet0/4/3]port trunk PER

[SW2-Ethernet0/4/3]port trunk permit v

[SW2-Ethernet0/4/3]port trunk permit vlan all

Please wait........................................... Done.

12 / 34